Classic Marine Hardware             Dan Reed & Douglas Barr
                   barrcast@barrcasting.com                                                                                                                                                                                                

  Most of the photos seen hear are of wood foundry patterns. This is a truly unique life time collection of under water hardware, passed to us in 1982 from the old Portland Boat Works . Our foundry patterns are not for sale they are shown to represent the casting configurations available from our Portland Oregon USA foundry. For those of you that may not be familiar with foundry patterns. The round extension that you see in each photo are the core prints. A stock core is what creates the shaft hole, ready for machining. A core print is what causes a place in our mold to support the core whale the bronze is cast around it. In most of the photos you can see a mark on a ruler one foot down from the imaginary bottom of your boat (top of photo.) Strut castings can be purchased with or with out the installed cutlass bearing. Rudders can be customized to suit variety of needs, see the explanation with each photo.

6"x9" Boat bow figurehead   11/8/11 aluminum $97.50      Polished bronze $185.00  
Bow figurhead

(#100) Strut   22" wheel 1"3/4 shaft  degrees pitch.

( #2) Strut   12" wheel 1" shaft  11 1/2 degrees pitch

(#3) Strut  20" wheel 2" shaft 11"1/2 degrees pitch.

(#10a) Strut   26" wheel 2"1/4 shaft 59 lb casting.

(#8) Strut   12" to 14 wheel 1" shaft 17  degrees pitch.

(#11) Strut  13" Wheel 1"1/8  shaft 10"1/2 degree

(#12-A port) (#12-B starboard) Strut 20" Wheel 2" shaft Twin pitch adjustable foundry patterns 10 to 16 degrees 23 lb castings each.

(#14) Strut 12" Wheel 1" shaft 12 1/2 degrees pitch.

(#15) Strut 12" Wheel 1" shaft 15 degrees pitch.

(#16) Strut 12" Wheel 1" shaft 17 degree pitch 12 lb casting.

(#17-A port) (#17-B starboard) Strut 16" Wheel 1"3/4 shaft 10 degrees pitch.

(#18) Strut 16" Wheel 1"3/4 shaft 13 degrees pitch.

(#19) Strut Steady Bearing 1" shaft 11 1/2 degrees pitch.

(#20) Strut 12" Wheel 1" shaft 12 1/2 degrees pitch.

(#22) Strut 24" Wheel 2" shaft 11 1/2 degrees pitch.

(#23) Strut 12" Wheel 1" shaft 16 1/2 degrees pitch

(#26)Strut  10" Wheel 1" shaft  12 1/2 degree pitch

(#27) Strut 22" Wheel up to 1/34 shaft 27 lb casting.

(#37) Strut 16" Wheel 1"11/4 shaft 13 lb casting adjustable foundry pattern to 17 degrees pitch.

(#41) Strut , Trolling Motor - port 2" shaft 13 degrees pitch.

(#69) Strut 22" Wheel up to 1"1/3 shaft 14 degrees pitch.

(#84) Strut 12" Wheel 1" shaft adjustable foundry pattern 10 to 16 degree pitch.

(#88) Strut 20" Wheel 1"3/4 shaft 11 degrees pitch 26 lb casting.

(#91) Strut 17" Wheel 1" shaft adjustable pitch foundry pattern 8 to 10 degrees

(#109) Strut 12" to 14" Wheel 1" shaft 10 1/2 degrees pitch Note: Use the #109 with the #18 rudder or #64 rudder

(#18) Rudder 10"x19"  Use the #18 Rudder with the #109 Strut

(#25) Rudder 8"x 12"

(#33) Rudder 13"x19"

(#34) Rudder 11"x14"

(#38) Rudder 11"x14"

(#51) Rudder 12" 1/2x13"

(#53) Rudder 12"x12"

(#55) Rudder 14"x18"

(#60) Rudder 7"x 16"

(#64) Rudder 12x15   Or use the #64 Rudder with the #109 Strut

(#95) Rudder 13"x18"

(#102) Rudder 12"x12"
 

For classic windless deck hardware we recomend ABBA Industries call Ron at 503-668-5757